What kind of transmission fluid does a Ford Fusion take?
Motorcraft® MERCON® LV is a premium-quality automatic transmission fluid recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require MERCON® LV type fluid.
How many quarts of transmission fluid does a 2011 Ford Fusion SE take?
The 2011 Ford Fusion transmission fluid capacity varies, depending on which transmission is in the car. The manual transmissions can hold 3 quarts, the Aisin F21 6-speed automatic can hold 7.4 quarts and the 6F35 6-speed can hold 9 quarts.
What transmission does a 2011 Ford Fusion have?
Engine 2.5L I-4
Transmission 6-spd man w/OD
Power 175 @ 6000 rpm
How many quarts of transmission fluid does a Ford Fusion take?
The Ford Fusion transmission fluid capacity iS5. 7 quarts. The transmission fluid needs to be replaced every 30,000 to 60,000 miles.
What type of transmission fluid does a 2016 Ford Fusion take?
Valvoline – DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.
What kind of transmission fluid goes in a 2014 Ford Fusion?
The 2014 Ford Fusion’S6-speed automatic transmission uses Dexron ViATF fluid. You can expect to schedule a flush and filter change for its transmission every every 150,000 miles. This is best accomplished by a licensed shop or reliable local dealership.
What kind of transmission fluid does my 2008 Ford Fusion take?
The 2008 Ford Fusion uses Mercon LV transmission fluid as standard in the car. This is recommended by Ford to provide You the best protection and lubrication for the gears in Your transmission. You should make sure to change Your fluid every 30,000 to 50,000 miles depending on the condition.
How much transmission fluid do I need for a 2013 Ford Fusion?
A 2013 Ford Fusion transmission flush also uses about 10 quarts of fluid to completely clean and flush out the system.
How much transmission fluid does a 2015 Ford Fusion?
A 2015 Ford Fusion transmission flush also uses about 10 quarts of fluid to specifically clean and flush out the system.
How much transmission fluid does a 2014 Ford Fusion take?
The 2014 ford fusion transmission fluid capacity is 5 quarts.
Does a 2011 Ford Fusion have a transmission dipstick?
If You want to know how to check the transmission fluid on the 2011 Ford Fusion, I can help You. … You’re going to want to pull out the transmission fluid dipstick and clean it off with a shop towel. Insert the dipstick back and pull it back out. By looking at the dipstick, You should be able to tell what the level is.
How do you check the transmission fluid on a Ford Fusion?
Go to the front of your car, and open the hood. Now, look toward the back of the transmission, and you will find a small black tipped dipstick protruding from the reservoir. Remove it and clean it thoroughly with a cloth. Re-insert the dipstick into the reservoir, then remove it again.
Where is the transmission dipstick located on a 2011?
First, locate the transmission dipstick, which can be found under the hood, in the engine compartment. Make sure you are locating the transmission dipstick and not the engine-oil dipstick; the transmission dipstick is usually further back in the engine bay, toward the firewall (the bulkhead at the front of the cabin).Jun 28, 2019