What does the 215 on a tire mean?
“215” in this sequence refers to the tire’s width in millimeters. In other words, this tire is 215 millimeters wide, from sidewall to sidewall.
What does r16 mean on a tire?
65 – This number is the Aspect Ratio, the ratio of sidewall height to width. R – Radial. 16 – This number designates the tire’s diameter in inches (i.e. 16″)
Can I use 215 65r16 instead 215 60R16?
There is a 10mm difference in the width which means that you will have less traction but considering you’ll go for the same class of tyre, this will be negligible.
What does 60 mean in tires?
60 is the two-figure aspect ratio. This percentage compares the tire’s section height with the tire’s section width. For example, this aspect ratio of 60 means that the tire’s section height is 60% of the tire’s section width. R indicates the construction used within the tires casing. R stands for radial construction.
What’s the difference between 205 and 215 on tires?
The diameter of the 205 is 26.3 inches and for the 215 the diameter is 26.7 inches. That is 0.4 inches of difference meaning that it would raise the height of the trailer by 0.2 inches. … This will not only help with the height but also help to prevent over heating which is why many trailer tires fail.Apr 11, 2016
Can 225 tires replace 215?
The diameter of 215 tires is much smaller than 225 models. Also, the aspect ratio of 215 tires is slightly higher compared to 225 tires. Therefore, there might be a minor change in the steering stability of both tires if used interchangeably. To sum up, yes, 215 and 225 models are interchangeable.
What is the difference between 215 and 225 tires?
The 215 tires will provide less grip than the 225 tires due to their different widths. With an increased grip on the road surface, the 225 tires will achieve greater levels of shorter braking distances while increasing traction, especially on wet surfaces.
Are 205 and 215 tires interchangeable?
If you are have a 205/50-16 tire and want to install a wider tire, you can install a 215/45-16 tire. The side profile is expressed as a percentage of the width and therefore needs to be smaller as the width becomes larger in order for the outer profile to remain the same.
How wide is a 215 60R16?
215/55-17 215/60-16
————————— ————— —————
Diameter inches (mm) 26.31 (668.3) 26.16 (664.4)
Width inches (mm) 8.46 (215) 8.46 (215)
Circum. inches (mm) 82.66 (2099.53) 82.18 (2087.27)
Sidewall Height inches (mm) 4.66 (118.25) 5.08 (129)
How wide is a 215 tire?
The first number, 215, is the width of the tire between the widest points of its inner and outer sidewalls. This is expressed in millimeters. So your tire is 215 millimeters wide, or 8.471 inches wide.Mar 2, 2014
What’s the difference between 215 60R16 and 225 60R16?
The 225 is only 10mm wider than the 215, but it is also 22mm taller with 11mm less clearance between the center of the wheel and the suspension components above the steering knuckle.. As most vehicles are engineered with at least 1 inch of clearance above the tire, this difference should not pose a problem..
Can I use 225 60R16 instead of 215 70r16?
Short answer: yes. The 225/60R16 will give you a tire diameter of 26.6″ while the stock 215/70R16 is 27.9″ so you’re looking at a reduction of almost 1.5″. Take a look at Tire Size Calculator to get an idea for how big (diameter) the tire will be.Jun 30, 2015
Can I use 225 55r16 instead of 215 60R16?
A 225/55-16 will give you a shorter sidewall than a 215/60-16. A 225/50-17 or 235/45-18 will give you an even shorter sidewall, and will be closer in overall height. When you go to a shorter sidewall, you normally are stuck with a wider tread, unless you can make your own tires.Apr 25, 2010
Can I use 225 65r17 instead of 215 60R16?
Though they differ in size, they make up for it in tyre height and width. In your case, they will most deffintely be a different diameter. There are multiple issues with that, check for brake caliper clearance inside the rim, and for rubbing in the wheel arch lining.Nov 8, 2016
